Inner Grooved Copper Tube
SAKY Metal inner grooved copper tube’s compact structure, the highly precise dimension, the normative and integrity groove shape, the low interior surface residuum, etc., the inside surface area increases 65～100% than that of the same specification of plain copper tube, the heat transfer coefficient is about 1.8～2.0 times of that of the same specification of the plain tube, inner grooved copper tube is widely applied to the Air Conditioner, the Assembly Type Air Conditioning Unit, the Residential Central Air Conditioning, Show Case Refrigerator which is in conformance with the developing tendency of the Air Conditioner and Refrigerator to the high efficiency, the energy saving.
Inner Grooved copper tube is to improve the heat transfer characteristics of copper tubes and heat exchangers, the inner surface of the tube is provided with spirally running grooves. The heat transfer coefficient of these tubes is about 2～3 times higher than that of the same specification of a plain tube. Increased internal surface area, turbulent flow of refrigerant and uniform distribution of refrigerant around the periphery of the tube cause increment of efficiency. By using the I.G tubes in fin block heat exchangers, the efficiency of the heat exchanger can be increased up to 30% depending on the application. In general, advantages that can be gained from usage of I.G tubes are: smaller unit size with unchanged efficiency, saving in material cost, space savings, smaller fan, and reduced noise level, smaller compressors, and energy saving.
 |  |  |
Low Fin Tube integral tubing
| Inner Grooved Copper Tube | Spiral Finned Tubes |
Specifications of inner grooved copper tube :
1. Standard: AS 1571, ASTM B280, ASTM B68 Inner Grooved, JIS H3300,ASTM B-68, GB/T 20928
2. Outside diameter: 5.0mm – 50.00mm
3. Inner diameter: 4.3mm – 14.22mm
4. Bottom wall thickness: 0.20mm – 0.50 mm
5. Fin Height: 6mm to 12 mm
6. Fin Pitch: 7,9,10…13,14mm Fin Per Inch
7. Length: up to 15meter
8. Grade: Aluminum, Copper(C12200), Duplex tubes
9.Unit Weight: 34kg -270 kg
10. Package: packed individually by reel, 6-7 coils packed by one pallet
Note: Customized sizes and shapes are accepted.
INNER GROOVED COPPER TUBE TECHNICAL DATA :
| O.D. | Bottom Wall Thickness Tw | Fin Groove Depth Hf |
| Inch | mm | Inch | mm | Inch | mm |
| 0.1575 | 4 | 0.008~ 0.012 | 0.20 ~ 0.30 | 0.004~ 0.006 | 0.10 ~ 0.15 |
| 0.1875 | 4.76 | 0.008~ 0.014 | 0.20 ~ 0.35 | 0.004~ 0.006 | 0.10 ~ 0.15 |
| 0.197 | 5 | 0.008~ 0.014 | 0.20 ~ 0.35 | 0.004~ 0.006 | 0.10 ~ 0.15 |
| 0.2363 | 6 | 0.008~ 0.014 | 0.20 ~ 0.35 | 0.004~ 0.008 | 0.10 ~ 0.20 |
| 0.25 | 6.35 | 0.008~ 0.014 | 0.20 ~ 0.35 | 0.004~ 0.008 | 0.10 ~ 0.20 |
| 0.275 | 7 | 0.01~ 0.016 | 0.20 ~ 0.41 | 0.004~ 0.010 | 0.10 ~ 0.25 |
| 0.3125 | 7.94 | 0.01~ 0.016 | 0.20 ~ 0.41 | 0.004~ 0.010 | 0.10 ~ 0.25 |
| 0.375 | 9.52 | 0.01~ 0.016 | 0.20 ~ 0.46 | 0.004~ 0.012 | 0.10 ~ 0.30 |
Please be noted:
Apex Angle(Tolerance) α 30 ~ 90
Helix Angle Deg(Tolerance)β15 ~ 30
Number of Tooth(Number) 40 ~ 70
INNER GROOVED COPPER TUBE SPECIFICATION :
| Specification | Outside
Diameter
(mm) | Bottom Wall Thickness
(mm) | Groove Depth Hf
(mm) | Number of Groove | Inclination Angle
(Degree) | Fin Angle
(Degree) |
| 7.00*0.25+0.18 | 7 | 0.25 | 0.18 | 50 | 18 | 40 |
| 7.00*0.27+0.15 | 7 | 0.27 | 0.15 | 50 | 18 | 40 |
| 9.52*0.27+0.16 | 9.52 | 0.27 | 0.16 | 70 | 18 | 40 |
| 9.52*0.28+0.12 | 9.52 | 0.28 | 0.12 | 65 | 15 | 53 |
| 9.52*0.28+0.15 | 9.52 | 0.28 | 0.15 | 60 | 18 | 40 |
| 9.52*0.28+0.20 | 9.52 | 0.28 | 0.20 | 60 | 18 | 40 |
| 9.52*0.28+0.20 | 9.52 | 0.28 | 0.20 | 60 | 18 | 53 |
| 9.52*0.30+0.20 | 9.52 | 0.30 | 0.20 | 60 | 18 | 53 |
| 9.52*0.34+0.15 | 9.52 | 0.34 | 0.15 | 60 | 18 | 53 |
| 9.52*0.34+0.20 | 9.52 | 0.34 | 0.20 | 60 | 18 | 53 |
| 9.52*0.45+0.20 | 9.52 | 0.45 | 0.20 | 60 | 18 | 48 |
| 12.7*0.35+0.25 | 12.7 | 0.35 | 0.25 | 65 | 18 | 53 |
| 12.7*0.35+0.25 | 12.7 | 0.35 | 0.25 | 65 | 18 | 65 |
| 12.7*0.41+0.20 | 12.7 | 0.41 | 0.20 | 70 | 18 | 65 |
| 12.7*0.41+0.25 | 12.7 | 0.41 | 0.25 | 60 | 18 | 65 |
| 12.7*0.45+0.20 | 12.7 | 0.45 | 0.20 | 50 | 18 | 53 |
| 15.87*0.4+0.28 | 15.87 | 0.40 | 0.28 | 75 | 18 | 53 |
| 15.87*0.4+0.28 | 15.87 | 0.40 | 0.28 | 60 | 18 | 53 |
| 15.87*0.58+0.3 | 15.87 | 0.58 | 0.30 | 75 | 18 | 48 |
Note: This is just part of the standard parameters of our products. Please contact our Engineer if you need more
Packaging:
1. Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging.
2. Saky Metal’s pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as,
Features:
1 Leak proof
2 Long lasting
3 Accurate groove designs
4 Corrosion resistant
5 High metallurgical strength
6 High temperature resistant
7 High pressure resistant
8 Excellent heat transfer property
9 Good electrical conductivity, etc.
Applications:
Applications of Inner Grooved Copper Tubing:
Air Conditioner,
the Assembly Type Air Conditioning
Unit, the Residential Central Air Conditioning,
Show Case Refrigerator and so on.
Why Choose Us:
1. You can get the perfect material according to your requirement at the least possible price.
2. We also offer Reworks, FOB, CFR, CIF, and door to door delivery prices. We suggest you to do deal for shipping which will be quite economical.
3. The materials we provide are completely verifiable, right from raw material test certificate to the final dimensional statement.(Reports will show on requirement)
4. e guarantee to give a response within 24hours(usually in the same hour)
5. You can get stock alternatives, mill deliveries with minimizing manufacturing time.
6. We are fully dedicated to our customers. If it will not possible to meet your requirements after examining all options, we will not mislead you by making false promises which will create good customer relations.
Quality Assurance(including both Destructive and Non-Destructive)
1. Visual Dimension Test
2. Mechanical examining like tensile, Elongation and reduction of area.
3. Impact analysis
4. Chemical examination analysis
5. Hardness test
6. Pitting protection test
7. Penetrant Test
8. Intergranular Corrosion Testing
9. Roughness Testing
10. Metallography Experimental Test
